Operating Instructions
How - to instructions, user tips and more
- Dobby 2.0 keeps disconnecting from my device
- Jane feet length and harness / shaft height from the table during setup
- Floating breast beam vertical is not equal on left and right side
- Louet Inkle loom
- Fly shuttle tension
- What is the difference between Dobby 2 and Dobby 1 for the Megado
- Megado dobby 2.0 - I can not connect to louetwifi
- Jane 16 shaft roller positions
- Dobby 2 keeps dropping the wifi connection
- Adding heddles to a Louet Megado loom
- Jane - loose threads at the bottom of the shed
- David 2 - Beater repair kit
- Beater Guide for Megado
- David 3 / Spring 2 - Beater arm is rubbing on the side of the loom
- David 3 - Inserting or removing the shaft blocking pin
- Spring 2 / David 3 - tie up cords catch on each other - how do I resolve this ?
- David 3 / Spring 2 - Shed is small - beater is too high
- Megado - harness end keeps coming loose
- Warping Instructions
- Setting up a warp - #1 making your pattern draft plan
- Setting up a warp - #2 making a warp
- Setting up a warp - #3 making the loom ready for winding on your warp
- Setting up a warp - #4 Placing the warp in the raddle
- Setting up a warp - #5 Winding on your warp
- Setting up a warp - #6 threading the warp through the heddles
- Setting up a warp - #7 threading the reed
- Setting up a warp - #8 tying on a warp
- Setting up a warp - #9 tying up the treadles
- Setting up a warp - #10 Starting to weave
- Adjusting treadle positions - prevent treadles from hitting the cross bar