FAQ
- Kombo - Upgrading beater with Jane wedges
- Magic Dobby - Shafts not returning to rest
- Megado - A Shaft Is Slanted
- Megado - A shaft that should stay down, comes up when you make a shed
- Megado - Can Long Eyed Heddles be Used On a Louet Megado
- Megado - Dobby sensors intermittent activation
- Megado - Electronic dobby - Knife bar dropping shafts (screw heads)
- Megado - Mechanical dobby - Roller does not advance to the next position
- Megado - One shaft sticks 10 mm (about 1/2") above the other shafts while it is in its rest position.
- Megado - shafts are sticking
- Megado - switch block keeps coming loose
- Megado - The cloth cannot be wound onto the cloth beam.
- Megado - the knife bar gets stuck in the groove
- Megado - the shed is too small.
- Megado - The warp does not come loose from the warp beam when the warp is advanced.
- Megado - When you push the shed treadle, there is no shed.
- Megado - While weaving, the tension in the warp changes.
- Megado Dobby 2.0 - Why doesn't Louet Software read my WIF file?
- Megado Dobby 2.0 Color mapping from Fiberworks into Louet Dobby software
- Megado or Octado dobby - The knife bar is too low or has slipped down
- Megado, Octado, Magic - problem with MAC OS 11 /12 /13 support FTDI USB to SERIAL driver
- Megado/Octado - Dobby knife is stuck between the screw heads of the dobby hooks.
- Megado/Octado - mechanical dobby - One of the treadles cannot be pushed down.
- Megado/Octado – Dobby activating/deactivating picks irregularly
- Megado/Octado – Shafts lifting when not selected
- My friction brake is slipping, regardless of how much I tighten it
- Octado - setting the mechanical dobby transport cord tension
- Spring - Cloth Beam has alot of play - beam slides back and forth
- Spring - Loom treadles make noise
- Spring / Delta loom neutral position - harnesses do not go back to a rest position