S90 Mother of all droops

If your S90 Mother of all will not tighten and continually drops down, we have a solution.

The Mother of all is held in place by tightening the knob on the right side of the wheel, The original S90 had a threaded did running through the entire back of the mother of all. It was secured on the left side by being welded to an embedded nut. What has occurred more often is that the weld has broken - due to time and use. The fix is to remove the embedded nut ( you can see it on the left side) and then replace the existing threaded rod with a longer one and another knob on the left side (same as the right) so that you can secure the mother of all by holding one knob and tightening the other side. Threaded rod length is 30 cm.   Louet offers this repair package for - part Number SR0145 and can be purchased through any Louet retailer.