Team Louët @ Louet Support
- Total activity 557
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 305
Articles
Recent activity by Team Louët @ Louet Support-
Raddle covers
Raddle covers are new products introduced with the Spring II in Dec 2020. These covers will fit all older Spring looms as well as Megado and David looms. These covers will be available as acce...
-
Weaving Accesory - Warping mill is not spinning smoothly
Some users have experienced the warping mill ceasing and squeaking loudly. The cause of this issue is due to swelling of the cross members from humidity. The swelling causes added friction and th...
-
Megado / Octado / Delta - Height Extenders Treadle
For people with shorter legs, the Megado and Delta looms can be have treadle height adjusting blocks added With the Megado (part number WA0175) and the Octado (WA0319) this includes an extra bar t...
-
Spring 2 - Winding on a warp
In order to wind on a warp, you need to use 2 hands, one to lift the brake release and one to wind the warp. This can make winding a warp a little more awkward. The original Spring had a ratchet ...
-
W30 Instructions
Attached are the instructions for the W30 loom
-
Raddle sections
Louet raddles are made by a series of 10 cm raddle sections that are placed in a groove at the top of the castle of each of our looms. Any section can easily be removed and replaced. Here is a shor...
-
S10 Concept - identification
How do you know if you have an S10 Concept or an older S10 wheel? The front of the mother of all, where the Louet logo appears, says "S10 Concept" on all S10 Concept wheels. If it just says "S1...
-
Various original Kombo loom instructions
Attached are various Kombo Loom instruction manuals - original versions. The Kombo loom was made in the 90's and early 2000's. The Kombo was replaced by the Jane loom. The kombo and Jane have...
-
Spring - Cloth Beam has alot of play - beam slides back and forth
If you have too much play for the ratchet to fall in between the ratchet wheel and the side of the loom,this can happen on occasion. The length of the beam should fit between the sides of the Spr...
-
Spinning Wheel - converting a Louet single treadle wheel to a double treadle
Only S10 Concept wheels can be converted from Single treadle to Double treadle. Just purchase a double treadle base for an S10 Concept. (partnumber SC0103) Older S10's, S51's, S15's can not be con...