Team Louët @ Louet Support
- Total activity 557
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 305
Articles
Recent activity by Team Louët @ Louet Support-
Jane feet length and harness / shaft height from the table during setup
In 2024 we added a shuttle race for Jane 50, 70 and eventually Jane 90. With this accessory, we discovered that the loom will not sit on a table folded due to interference with the shuttle race....
-
E- spinner lubrication - Jenn-E
If your Jenn-E is squeaking, add some vaseline (liberally) to the orifice and orifice support. The more you spin and lubricate, the less it will squeak.
-
Jenn- E battery options - E-spinner
The new Louet E-spinner can be operated with a battery. The battery you need is a 10-18V and 15Ah battery. This size will give you about 15 hour of spinning time. This is a bigger battery th...
-
Moving a David or Spring loom
The back beam section can be folded to the castle after loosening the two eye bolts. If there is a warp on the loom, tightening the warp keeps the back beam in place.If not, use some cord or rope ...
-
Floating breast beam vertical is not equal on left and right side
We recommend setting up the verticals so they are flush with the front leg of the loom for quick and easy reference when you advance your warp. However, sometimes, even with the same number of ex...
-
S20 wheel
There have been two versions of the S20. From 1977 to 1979 there was a special export version of the S10, which could be disassembled so that it could be sent as a flat package. After that, the S10...
-
Megado Dobby 1 vs Dobby 2
There are many Megado dobby 1’s in the market and still working well. Some may have questions as to the need for the Dobby 2 and rational - here is some additional information We found that OS’s...
-
Louet Inkle loom
Below are the instructions for the Inkle Loom
-
Difference between the original Jane and new Jane 8 shaft expandable
The difference between the looms is that the sides are longer making the expandable 8 shaft Jane loom deeper to accommodate the extra shafts. When purchasing this variation, you only receive the ...
-
Fly shuttle tension
If you need to adjust the tension on your fly shuttle, use a flat head screwdriver as shown in the image and tighten the set screw that is deep within the shuttle.