Team Louët @ Louet Support
- Total activity 557
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 305
Articles
Recent activity by Team Louët @ Louet Support-
Dobby 2 keeps dropping the wifi connection
Most often, we use wifi connection on our Ipads, phones or computers to connect to the internet. Windows and other OS's have built in methods to always connect to the strongest internet connection...
-
Metric reed conversion to inches
Metric reeds sold by Louet are described as dents in 10cm. 40-10 is 40 dents in 10cm 1 inch -= 2.54 cm Therefore there are 3.937 inches in 10cm Conversion - take the first number in the siz...
-
Adding heddles to a Louet Megado loom
-
Finishing your Erica loom
With the piece of sandpaper from the first hardware bag, you can smooth the edges of thewooden parts. If you want to finish your Erica with a water-based lacquer or wood oil, do thatbefore assembling.
-
Jane 16 assembly instructions
The 16 shaft Jane loom was introduced in Dec 2023 Shuttle race attachment assembly instructions
-
Springs from my brake keep falling off - Spring 2 / David 3
If your brake tension system springs keep falling off when you release your brake tension, try changing how you release the brake. By lifting the brake handle, one of the springs stretches and on...
-
Louet Bobbins
The current S10 bobbin will fit on all older single treadle or double treadle wheels of the past except a couple. SA0102 is the standard IrT S10 bobbin and fits on S10, S10C, S51, S70, S71, S75, ...
-
S30 - Original Louet Electric Spinner
Louet made an E-spinner back in the 1970's, before they were popular. Some of these units are still in circulation. Here is some information that came with them
-
David 3 breast beam height
David 3 breast beam is 29 1/4" from floor to the bottom of the beam and 31 ½” to the top of the beam
-
Jane - loose threads at the bottom of the shed
With linen and other yarns that are not very elastic, it is sometimes a problem to get good tension on the lower half of the shed on the Jane-loom. Because the depth of the Jane is so great, the pr...