Team Louët @ Louet Support
- Total activity 557
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 305
Articles
Recent activity by Team Louët @ Louet Support-
Spring 1 Relevant measurement and information
The original Spring was introduced to the market in the eighties and has undergone only minor improvements over the years. The new Spring 2 was launched in 2020, replacing the original Spring in o...
-
Spring I assembly manual
This is the instruction manual for Spring looms in the 2000-2020 timeline
-
Spinning Wheel - main wheel bolt connection
Original Louet Spinning wheels If for some reason you have to take the main wheel off your spinning wheel, here is a diagram that shows the correct sequence of parts to re-assemble. This parts di...
-
Jane - Folding your Jane loom
Here are some instructions and a video Folding your Jane Loom with a warp on:1. Release the tension off the back beam2. Raise all harnesses so they are up.3. Undo the screws on the side4. Fold her ...
-
Spring loom cord lengths (Original Spring 1980's to 2020)
Length of the cords shaft cords: 575/614 cm, treadle cords: 35,5/ 54,5 cm, beam cords: 142 cm, cords to attach the floating arms to the springs: 125 cm,cords to block the floating arms:21 cm, cord ...
-
Jane - Can the Jane loom be retrofitted with metal heddles?
No, the Jane can not be converted to use metal heddles.a. They won’t fit on the harness barsb. The weight of them will not be sustained by the construction of the loom – its designed for the weight...
-
Adding Spring-1 harnesses - four shaft extension instructions
See attached instructions
-
Spring 2 Instruction manual
download the new assembly manual 2023-05
-
Megado / Octado Computer dobby - Bent Solenoid push rod
If your solenoid is bent, you can fix this by simply bending the pushrod back. Attached is a video which shows the process.
-
Spinning Wheel - Old Louet S10 bobbins with whirl on each side
Original S10 Originally, Louet wheels came with bobbins that had a single whirl on each end of the bobbin. These older bobbins are no longer available, however, current bobbins will fit on your whe...