Team Louët @ Louet Support
- Total activity 543
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 305
Articles
Recent activity by Team Louët @ Louet Support-
David-1 and David-2 loom brake assembly instructions
Please find the instructions for attaching your loom friction brake to the David-1 or David-2 loom
-
Adjusting treadle positions - prevent treadles from hitting the cross bar
When depressing a treadle, other treadles can sometimes move upwards. The end of the treadle can hit the crossbar above the treadles making a “clacking” sound. You can eliminate the clacking by app...
-
Spring 2 improvements with explanations
Louët is always innovating, dedicated to bringing you the most comfortable, enjoyable weaving experience. We have updated one of our most popular looms, here are the improvements. The warp beam and...
-
General - Spinning Wheel Parts Diagram
diagram of the most common parts of a wheel.
-
David-1 en David-2 sliding beater kit assembly instructions
See the attached instructions for the David 1 & 2 sliding beater kit.
-
Jane loom cords falling off rollers
If your shaft cords are coming off the rollers during weaving, try tightening the black elastic cords under the shafts. Pull one end of the elastic cord out of the inside of the shaft end. Undo...
-
2nd warpbeam Megado, Delta, Octado, Spring
When using a Louet 2nd warp beam, the tension brake on the main beam only works on the main beam. The 2nd beam is tensioned with the supplied ratchet and pawl system only. This means you do ha...
-
Spinning Wheel - Replacing a footman to wheel connector
The footman to wheel connector is a black plastic cup that connects your treadle to the main drive wheel. Part#SR0108 The cup sits over top of a silver bearing. First, unscrew the black cup from ...
-
Jane loom harnesses not lowering completely
If you are having trouble with the shafts on your Jane loom not returning to their lower position you may need shorten the black elastic cords that pull your shafts back down. Shortening the cords ...
-
Sectional Warping instructions
Sectional warping is another method of getting a warp on your loom. This method is particularly useful if you are making long warps with fine yarn. Sectional warping can only be performed on Louet ...