Team Louët @ Louet Support
- Total activity 557
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 305
Articles
Recent activity by Team Louët @ Louet Support-
Megado/Octado - Dobby knife is stuck between the screw heads of the dobby hooks.
Possible reasons: 1. You moved the dobby by hand while you kept the treadle for the shed pushed in. 2. With a second warp beam and a sectional warp beam we supply extra springs, which help to compe...
-
Megado - electronic / dobby - Dobby knife bar dropping shafts / screw heads
Check that your dobby is physically well connected, nuts are tight, dobby is as close to the loom as it can be / should be. Your dobby's solenoids fire when the pattern asks for that harness to be...
-
Megado / Octado Dobby activating picks/ deactivating picks irregularly
If your dobby is not activating or deactivating picks correctly, sometimes its because your beater is set too high. Is your warp uneven? Pull your beater towards you. Now push it back toward...
-
Megado - Can Long Eyed Heddles be Used On a Louet Megado
No, there is no way you could put long eyed heddles on this loom and make it work like a draw loom. The Megado is a computerized dobby with a pure Jack Action. It has a countermarche shed meani...
-
Hollandia - Replacing all texsolv cord on a Hollandia loom
The total length texsolv cord needed for a Hollandia 4 shaft 130-4 is 27 meter.Each cord of the counter march system is 6.64 m long Treadle tie up cord lengths are 38.5 cm and 60 cm See the art...
-
Kombo - upgrading beater with Jane wedges?
Question: Is it possible to retrofit it with the little bumpers that hold the beater back on the Jane? The Kombo 40 cannot have the plastic wedge system added, however you can use elastic bands tha...
-
W70 loom - can I convert a four shaft to an eight shaft?
Question - I was interested in the 4 shaft extension for the W70. Is there any way I could get some pictures or information on this 4 shaft extension so I can make a decision? I bought the loom use...
-
W70 plastic heddles available?
We discontinued the W70 and W40 over 30 years ago and have long run out of plastic heddles.We offer a W70 & W40 Texsolv conversion kit which allows you to change the heddles to Texsolv (string) hed...
-
David 2 - advancing the warp
You lift up the leaver with your right hand and advance the cloth beam with your left. If the warp beam does not come loose, this could be caused by the brake pawl being on the ratchet wheel of th...
-
My friction brake is slipping, regardless of how much I tighten it
Your drum has become so smooth the cable doesn’t grip any longer. Use coarse sandpaper or a coarse file and rough it up. That will allow you to get proper brake action again. This applies to th...