Dave @ Louet Support
- Total activity 540
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 297
Articles
Votes on activity by Dave @ Louet Support-
Care and maintenance of Louet spinning wheel
Ease of use for the spinning enthusiast is the number one priority in the design of our spinning wheels. Our ball bearings allow easy, smooth rotation of the main wheels and the footman conne...
-
General - Spinning Wheel Parts Diagram
diagram of the most common parts of a wheel.
-
Spring 1 Relevant measurement and information
The original Spring was introduced to the market in the eighties and has undergone only minor improvements over the years. The new Spring 2 was launched in 2020, replacing the original Spring in o...
-
David-1 en David-2 loom harnesses are not even and I don't get an even shed.
For David-3 there are separate instructions If the shafts are not level, check and correct the following items as necessary Insert the blocking pin Look at this related article David - blokkee...
-
S40 spinning wheel (Hatbox)
The S40 has been nicknamed "Hatbox" by users around the world. To Louet, its the S40. Attached are several pictures and the original instructions which identify parts. Spareparts : S40 brake mec...
-
Spinning Wheel - Old Louet S10 bobbins with whirl on each side
Original S10 Originally, Louet wheels came with bobbins that had a single whirl on each end of the bobbin. These older bobbins are no longer available, however, current bobbins will fit on your whe...
-
S10 Spinning Wheel Original instructions
Here are the early model S10 instructions. They apply to the S51 and S15 as well.
-
Spinning Wheel - Louet Wheel drivebands
Louet wheels originally came with thick clear drivebands. These are no longer available, however, our current driveband will work on your wheel. There are a couple different drive bands for Louet...
-
S70 and S71 Spinning Wheel
Attached are the original instructions for an S70 or S71 wheel - these wheels were first introduced in 1982 and discontinued in 1992. These rustic European oak spinning wheels have largely the same...
-
Spinning Wheel - Footman to Treadle Connector
The Footman to treadle connector is the connection between the footman and the treadle. It is a 2" long piece of Polyurethane tube. It’s flexible and connected to each end with a screw. These are a...