Dave @ Louet Support
- Total activity 540
- Last activity
- Member since
- Following 0 users
- Followed by 3 users
- Votes 1
- Subscriptions 297
Articles
Recent activity by Dave @ Louet Support-
Floor looms - what is the blocking pin used for
You can block the shaft movement by applying the blocking pin. The blocking pin is used to stabilize the harnesses for threading and the tieup of the treadles. When the locking pin is fitted, the s...
-
how does Louet’s drum carder function
The carding action happens because wool is introduced to the 2 drums that are moving at different speeds and the cloth is moving in opposite directions. The difference in size of drum is needed t...
-
David 2 - advancing the warp
You lift up the leaver with your right hand and advance the cloth beam with your left. If the warp beam does not come loose, this could be caused by the brake pawl being on the ratchet wheel of th...
-
David - Adding or moving heddles
Adding and moving heddles on the David loom is not difficult, but you need to keep a few things in mind. Namely, the shafts of the David can become unbalanced if all the heddles are on one side. Wh...
-
David-1 and David-2 loom brake assembly instructions
Please find the instructions for attaching your loom friction brake to the David-1 or David-2 loom
-
David-2 sliding beater not sliding smoothly
Question: My David sliding beater is not sliding smoothly Answer: The root cause is the build up of natural weaving dust created from weaving and other dust built up from the environment your loom...
-
David-1 en David-2 sliding beater kit assembly instructions
See the attached instructions for the David 1 & 2 sliding beater kit.
-
David-1 - 4 shaft conversion kit s to a 4-shaft
In the initial production runs, there was a David loom with 4 shafts and 6 treadles. Since 2002, only the 8-shaft David has been available. This version did not yet include a brake di...
-
David-1 en David-2 loom harnesses are not even and I don't get an even shed.
For David-3 there are separate instructions If the shafts are not level, check and correct the following items as necessary Insert the blocking pin Look at this related article David - blokkee...
-
Victoria S95/S96 Instruction Manual
Attached is the instruction manual for the Victoria wheel Here are some common spareparts Accessory Part number Standard Bobbin SA0104 brake cord - nylon cord and spring SR0102 brake...